Permanent Jewelry
Cutters
$31.24
/
Shipping calculated at checkout.
The smaller size and slender profile of these Italian-made flush cutters make them ideal for close work and for trimming wire ends in tight spaces. Flush cutters require somewhat more pressure to make a cut than super- or semi-flush cutters. Though more noticeable than that left by the super- or semi-flush, the pinch is still minimal. The oval head shape helps extend blade life.
• These cutters have a lap joint; one half of the joint overlaps the other, and a screw is set through both halves, allowing the joint to be adjusted as needed.
• The coil spring is made of a simple coil of wire tempered to hold its hardness and spring back to its original shape after being compressed; the coil is attached to the inside surface between the tool handles.
• The ergonomic handles ensure both a secure grip and comfort over extended work periods.
These cutters are made from hardened tool steel, a very hard, strong material for cutters, and forged for the best combination of strength and durability; the jaws will not be nicked with normal use and keep their shape and finish well over time. Clean with protectant; avoid contact with moisture.
Attributes
Jaw Style: Flush
Jaw Length: 0.55" (13.97mm)
Maximum Cutting Capacity: 14 ga. (non-ferrous metals)
Overall Length: 5.51" (139.95mm)
Features & Maintenance
• Not for use with memory wire or Beadalon® or for cutting sprues; take care to avoid using these cutters beyond their maximum capacity.
• To prevent breaking the tip of the cutters, use the center of the jaws for your wire cutting tasks. The cutting capacity is significantly reduced at the tip of the jaws.
WARNINGS: This product can expose you to chemicals including diisononyl phthalate (DINP), which is known to the State of California to cause cancer (www.P65warnings.ca.gov).
• These cutters have a lap joint; one half of the joint overlaps the other, and a screw is set through both halves, allowing the joint to be adjusted as needed.
• The coil spring is made of a simple coil of wire tempered to hold its hardness and spring back to its original shape after being compressed; the coil is attached to the inside surface between the tool handles.
• The ergonomic handles ensure both a secure grip and comfort over extended work periods.
These cutters are made from hardened tool steel, a very hard, strong material for cutters, and forged for the best combination of strength and durability; the jaws will not be nicked with normal use and keep their shape and finish well over time. Clean with protectant; avoid contact with moisture.
Attributes
Jaw Style: Flush
Jaw Length: 0.55" (13.97mm)
Maximum Cutting Capacity: 14 ga. (non-ferrous metals)
Overall Length: 5.51" (139.95mm)
Features & Maintenance
• Not for use with memory wire or Beadalon® or for cutting sprues; take care to avoid using these cutters beyond their maximum capacity.
• To prevent breaking the tip of the cutters, use the center of the jaws for your wire cutting tasks. The cutting capacity is significantly reduced at the tip of the jaws.
WARNINGS: This product can expose you to chemicals including diisononyl phthalate (DINP), which is known to the State of California to cause cancer (www.P65warnings.ca.gov).